DIY Locker Door Profile Kit (Parts A & B)

$97.88$119.69 inc. GST

This unique DIY profile has been designed so you can create your own locker doors and access hatches to any size

  • Ideal for slide-out fridges, outdoor kitchens etc – create any size you want
  • Use the panel cut-out as the door insert for a high quality finish
  • Sturdy 2mm Aluminium profile for larger doors and cut-out sizes eg food trucks, toy haulers etc
  • 2 part design for easy & precise installation
  • Available in 4.8 m lengths and Mill Finish only – Price is for one 4.8m length
  • Customer chooses Profile A only or Profiles A and B (profile B is standard 25x12x1.6mm angle)
  • Freight available (see below) for minimum orders

DIY DIRECT – bulk discounts for batch of 55 lengths from the mill in mill finishclick here for more info

DIY Locker Door Profile Documents

DIY Locker Door Dimensions



Technical Info:

  • The same profile kit can be used to create the opening in the wall AND the  frame of the door – make sure you measure twice round the openings to order the correct number of lengths
  • All cuts to the composite panels and cut-out are straight through – with no rebate cutting required
  • Suits range of piano hinges (not supplied)
  • Easy D seal and lock installation (not supplied)
  • Easy cnc cutting for door hole and door cut-outs – no profile cut required for the cut out
    • Note distance between these cuts will be 38.4mm PLUS the ‘gap’ you require – eg for the hinge
  • Easy retro-fit – holes can easily be cut manually if wall panel already in place

Installation Info

  • For the dxf file for this product please Contact Us here and we will email it to you
  • Designed for composite panels from 28.5 to 29.5mm thickness
  • Ensure you measure all the way to the end of the mitre cuts when calculating lengths required
  • Ability to mitre & weld the joiner corners and then powder coat the frames your colour choice
  • If you weld the piano hinge in place to the aluminium profiles you can then use a 5mm rubber strip between them to make it watertight
  • And then use 10mm deep D seals on the other 3 sides

Freight Info:

Note for minimum orders of 4 lengths which

  • Available for collection ex SE Queensland (Mill Finish), Perth WA (Mill finish)
    • Item will be in 4.8m lengths
  • This item can be shipped with TNT to a factory address in a business zone or your local TNT depot only (not residential addresses).
    • Each length will be cut for freight at 2.4-2.8 m as advised above
    • You will receive the consignment note when shipping is booked

Do you have a question regarding this product ? Please email it to us on our Contact Form and we will be in touch.

Additional information

To be cut for shipping

2400/2400, 2500/2300, 2600/2200, 2700/2100, 2800/2000

Profiles required

Profile A ONLY, Profiles A and B


There are no reviews yet.

Be the first to review “DIY Locker Door Profile Kit (Parts A & B)”

You may also like…