Pop-top Canopy Lifter – Medium
$155.93 inc. GST
Robust canopy lifters designed for pop-top roof designs with a medium lift height requirement
- Spring loaded scissor-type canopy lifter
- Suitable for medium size pop-top roofs
- Designed to allow for maximum roof lift up to 685mm(see below)
- Length of lifter – 900mm
Description
Note – DIY recommend only allowing the canopy lifter to extend to 70-80% of their height – this will ensure the canopy is kept tight and make it easier to pull the canopy down. To close the lifter when it is fully extended requires a lot of force.
Your pop-top may require 2 or 4 lifters depending on the maximum roof weight it needs to lift. Install the lifters as pairs on opposite sides of the pop-top roof
Each lifter is designed to lift up to 35kgs
Fixing points are present in horizontal and vertical surfaces of frames for ease of installation. Frames are 34 x 16 mm channel.
Canopy lifters avoid the need for gas struts which are tricky to install to give a balanced lift
Additional information
| Colour | White, Black, Silver |
|---|
