Can my Composite Roof Panel be made with a camber?
Since the composite panels are made using the vacuum bagging technique that uses a flat table (Panels A and C) or by the Holt-melt process (Panels B) - they cannot be manufactured with a camber by way of insertions. However it is possible- once the roof has been securely installed…
DIY Guide – Caravan Windows, Vents and Skylights
I have a wall thickness of 50 mm - what windows can I use? With Eurovision caravan windows and Eurovision 2 windows, the standard inner frames that come with the product suit a wall thicknesses of 24-33 mm. If your wall thickness is greater than this you will need to…
DIY Guide – Designing for Composite Panel Kit A
This guide is intended to help customers specifically with the purchase of panels from the supplier of Panel Kit A. It will also help you with the drawings required and has important info you should know. What process is used to manufacture the panels from supplier A? The skins are…
Compliance – RVSA Update
All Low ATM Trailer (Light Trailer) Manufacturers and Importers MUST be completely operating under the RVSA by 30 June 2023. DIY Customers are likely to be eligible for Concessional RAV Entry Approval when it comes to the new rules of the RVSA if they manufacture less than 4 trailers…
DIY Guide – Adhesives
Do I need to use Fixtech Primer on Floor A? Fixtech Polypropylene primer is required if you are using adhesive or paint directly onto the polypropylene surface - such as with Holypan natural. Floor A has a flowcoat finish on the B side and a clear resin finish on the…
