Cruisemaster XT Coils Suspension Kit – Tandem

From: $4,056.22 inc. GST

Cruisemaster XT Coil paved the way for mainstream use of independent suspensions on caravans and camper trailers. Its simple yet robust design allows you to tow your trailer wherever the road takes you

  • Twin rate spring system with X5K King Springs
  • 35mm gas or 41mm foam sell dual tube dampers
  • Polyurethane bump stops & greaseable bushes
  • 2 ride height options
  • Camber and toe adjustment
  • Market leading ATM ratings up to 4450kgs
  • Drum or ventilated disc brake options
  • Australian manufactured with only highest quality components
  • Cruisemaster 5 year conditional Warranty
  • Kits are made to order and shipped Australia wide

Design your own kit by selecting from the many build options below and click ‘Make an Enquiry’ to send your design to us for a price and any queries.

Clear
Make an Enquiry

Description

Technical Information:

  1. The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.
  2. Ratings assume a drawbar load of 7-12% ATM.
  3. This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity.
  4. The ride height is reduced by 65mm if you select the drop axle option
  5. Measurement of the Chassis to Face dimension is important to ensure the wheel runs in the right place with correct clearance with the chassis. Particularly useful if you wish to match your tow vehicle wheels to your trailer wheels. See image gallery for help with How to Calculate the Chassis to Face Measurement and understanding wheel offsets
    • C/F  dimension is limited to a range of 175mm – 240mm for 10″ brakes
    • C/F dimension is limited to a range of 175mm – 260mm for 12″ brakes
  6. For Powder Coating colour choices see chart in ‘Product Documents’
  7. For help choosing your Spigot size see diagram in ‘Product Documents’

If you are building a chassis to suit this Suspension System please ‘Make an Enquiry’ above so we can provide all the dimensions you need for your design

Additional information

ATM - XT Coil Tandem

2200 Kgs, 2900 Kgs, 3300 Kgs, 3700 Kgs, 4100 Kgs, 4450 Kgs

Chassis to Face Dimension

175mm, 180mm, 185mm, 190mm, 195mm, 200mm, 210mm, 220mm, 230mm, 240mm, 250mm, 260mm

Axle Type

Straight Axle (Standard), Drop Axle (Lower by 65mm)

Brake Type

12in Disk Brakes, 12in CM Drums, 12in Alko Drums, 12in Dexter Drums, 10in CM Drums, 10in Alko Drums, 10in Dexter Drums

Spigot Size

93mm, 106mm, 110mm

Stud Pattern

LC6 1/2in, LC6 12mm, LC5 14mm, Other

Wheel Nuts Required

Yes, No

Shock Absorbers

Single 35 (White), Twin 35 (White), Twin 40 (Silver)

Trailing Arm Finish

Uncoated, Powd Coat Std-Black, Powd Coat Std-Red, Powd Coat Prem-Yellow, Powd Coat Prem-Orange, Powd Coat Prem-Signal Red, Powd Coat Prem-Flame Red, Powd Coat Prem-Green, Powd Coat Prem-Blaze Blue, Powd Coat Prem-Space Blue, Powd Coat Prem-Black